Airless spray painting

If you're looking to get your commercial building painted by a professional commercial painter in the Niagara region, then go with an industrial painter that knows quality and has the background and experience necessary to get the job done right.  At Professional Painters Niagara, we use the best paints and apply the best practices to all of our coating techniques.  In fact, one of the areas we specialize in is airless painting.  Many contractors in Niagara, whether they're spraying stains, oil, or latex paints, will speed through a job to cut down on employee expenses so they can collect the maximum on the bid.  This often results in a plethora of overspray and uneven coats.  Or even worse, they have no experience using the spraying equipment and the end result of their work is poor.

How Airless Painting Works

An airless sprayer works by pumping paint at a very high pressure, up to 3200 PSI, through a hose and out a small hole at the tip of the spray gun.  The tip is designed to evenly break up the paint into tiny droplets in a fan-shaped spray pattern.  Different types of paints can be sprayed using different types of tips, because stain and lacquer are thin liquids whereas latex house paints are thicker.  Since an airless sprayer pumps paint directly from a 19 L bucket, you're able to apply a lot of paint in a short time.  This makes an airless sprayer very well suited for large paint jobs, like priming bare drywall in a new house or painting hundreds of feet of fence along the edge of a property.

We specialize in airless spraying and we'll determine the best, long-lasting paints to be sprayed in the interior or on the exterior of your building.  From there, we use the best airless spraying techniques to apply two coats to any surface.  The end result is a superior look that is also protected against wear and tear, as well as aging and weather damage.

If you have a commercial building in Niagara that requires a large amount of paint work, it's important to go with a painting contractor who you know can do the job professionally - the way you'd like it done yourself.  The most cost effective way to complete a large job is by spraying it, so don't take a chance with a contractor who lacks the experience necessary to get the job done right.